Ceramic Carbide Putty

Ceramic Carbide Putty against fine particle abrasion
2 pack non-sagging, trowel applied epoxy putty is extensively used for repairing and protecting surfaces against abrasive attack. SavesPast CCP is containing maximum load of high alumina ceramic beads and silicon carbide designed to give maximum abrasion resistance. The product offers maximum performance against entrained particulate abrasion, constant vibration, and wearing surface abrasion.
Product Specification Details |
||||
PROPERTIES | STANDARD | UNIT | VALUES | |
Pack Size | Kg | 1 | ||
Coverage | - | cm2/pack size/thickness | 800 Cm2 / kg / 5 mm | |
Color and Apperance | ASTM D 1544 | - | Dark Grey & Thick paste | |
Specific Gravity | ASTM D 1475-98 | - | 2.1 | |
Mix Ratio By Weight | Manual | - | R(4):H(1) | |
Mix Ratio By Volume | Manual | - | - | |
Pot Life @ 30°C | IS 101 | min | 30 | |
Functional Cure | ASTM D 1640 | Hrs | 16 | |
Compressive Strength | ASTMD 695 | N/mm2 | 88 | |
Adhesive Shear Strength | ASTM D1002 | N/mm2 | 16.5 |
-
Application Demo
- Fast,cost effective and durable
- High compressive strength and extreme chemical resistance Good resistance to abrasion, friction reduction and hence ideal for turn-around time.
- The product may be applied to any unlimited thickness onto horizontal or vertical surfaces
- Efficient alternate method of repair where welding or brazing would be undesirable or impossible
- Can Repair Intricate shape or forms/thin sections, difficult to weld metals
- No equipment/Power supply needed
- Unlimited cycle of repairs
- Less Labor costs - Avoid assembly/disassembly, Pre Machining/Post Machining Resistant to chemicals and most acids, bases, solvents, and alkalis.
- Superior adhesion – forms a solid bond to steel, cast iron,
- Stainless steel, concrete, and clean and abraded bronze, copper, and aluminum.
- Eliminates costly wear part inventory
- No shrinkage, expansion or distortion
- Excellent electrical insulation characteristics
- Can do repairs at In-situ repair, In-Plant, Workshops, Remote areas
- No VOC’s
- Routine Maintenance and Unexpected Maintenance
- Repair cost at fraction of replacement cost
Features of Ceramic Carbide Putty
Where to Use?
- Agitator blades Vessels
- Chutes Conveyor belting
- Rollers Screens
- Fans lining
- Cyclone and separator bodies
- Dust collectors and exhausters
- Fan blades and housings
- Repairing worn pump housings
- Preventing cavitation to condenser water boxes
- Rebuilding pump impellers
- Rebuilding condenser tube sheets area
- Compressor & oil coolers
- Ash & slurry pump
- Screw conveyors
- Transmission pan covers
- Oil pan covers
- Circulating water equipment
- Bow Thrusters
- T Pieces
- Coal Pulveriser
- Ash handling pipes and valves
- Seperators
- Vibrating feeders
- Screw feeders
Our Bank Details
- Name on the Account: Monarch Industrial Products (I) Pvt Ltd
- Current Account No : 622505009174
- Branch : P.B.No.30, 627, Jay Maruthi Towers, Periyakulam Road, THENI - 625 531 TamilNadu State
- Tel: 04546 – 254200
- IFSC/NEFT/RTGS Code No :ICIC0006225
- MICR Code :625229102

