Monarch Industrial Products (I) Pvt Ltd

(An ISO 9001 : 2008, ISO 14001 : 2004 & OHSAS 18001 : 2007 Certified Company)

Select Countries

Exterior Wall Coatings

The materials used for construction of building absorb and transfer heat inside of the building all the day. Heat always flow from the warmer side to cooler side and cooler to warmer side. 80% to 95% of heat gain during summer and about 70% of heat loss during winter trasferred through the walls, ceiling and roofs of the building by way of conduction and radiation. The conventional insulation only slows down the rate of heat transfer which after saturation cannot stop radiant heat. Monarch heat reflective coatings protect your roof from the deterioration caused by the sun's heat and UV radiation – heat absorption, asphalt breakdown, and thermal shock from heating/cooling cycles. Monarch heat reflective coatings provide a highly reflective, seamless solar barrier, protecting your roof against the corrosive elements that lead to moisture penetration and damaging leaks. If left unattended for too long, roof deterioration will exceed the limits of normal maintenance, and lead to a costly roof replacement.

OzoProtect EW

(Exterier Walls - Acrylic Modified Emulsion paint For Exterior Walls.)

Description :

OzoProtect EW pure acrylic-based exterior emulsion paint with no added lead and mercury. It is specially formulated for exterior walls with low VOC and low odour to protect the exterior surfaces from the extremities of extreme weather tropical conditions. It also provides tough finish that resists colour fading from UV light and the build up of dirt, mould and algae. The coatings keeps the surface dry even in heavy rain. The innovative Sola reflect technology reduces surface temperature by up to 5°C. This makes the interior cooler, thus helping to save energy.

 For Application Procedures :  Click Here

cbm-calculatorcbm-calculatorcbm-calculator

Triple Action Coatings

Where to Use?

Application Demo



Commercial Application

  • Hotels
  • Schools
  • Theater
  • Colleges
  • Apartments
  • Hospitals
  • Office Buildings
  • Shopping Malls
  • Restaurant
  • Warehouses
  • Air-Conditioned Building
  • Sintex water tanks and pipe lines - To prevent water heat up

Follow this simple steps for application procedures

clean

Clean and Wash the Surface

mix

Mix OzoProtect well, get to brushable consistency

apply

Apply using a brush or roller

coat

Apply two coats OzoProtect at 1-2 hours interval without dilution

Note :

  • Simple to DIY.
  • Simple to brush application/Avail local painters.

For Best Result :

  • Apply immediatly after water wash.
  • Avoid application during peak hot conditions (12.00PM to 2.00PM)

Our Bank Details

×