Monarch Industrial Products (I) Pvt Ltd

(An ISO 9001 : 2008, ISO 14001 : 2004 & OHSAS 18001 : 2007 Certified Company)

Select Countries

Acrylic polymer modified elastomeric waterproofing membrane coating for concrete and masonry surfaces

MonoProof BWP is a ready mixed coating, brush applied bituminous, black, lead- free, acid, alkali, water and chloride resistant that cures by reaction with atmospheric moisture to form a tough but flexible waterproofing membrane. They also meet the requirements for coatings suitable for use on surfaces in contact with potable water.

MonoProof BWP are based on raw materials which are amongst the most water and water-vapor resistant surface coating materials available. They are also resistant to a wide range of chemical attack. Also to protect the concrete against effects of chlorinated water, and to inhibit algae growth and facilitate easier cleaning. The excellent chemical resistance of MonoProof BWP makes it particularly suitable for sub-structure applications in areas where chemical contaminants and aggressive ground water conditions prevail.

 

Specially selected bitumens are blended to produce various grades, each designed to provide the best possible protective coating for its practical purpose. MonoProof BWP incorporates fibers which give body to the film and act as reinforcement in the coating, eliminating cracking and crazing under conditions of thermal movement.

Note : In common with all bituminous and tar based coatings, and many other organic materials, MonoProof BWP are susceptible to prolonged exposure to ultraviolet light and are not, therefore, recommended for use in situations where they will be exposed to direct daylight. They are however, ideally suited for use in sandwich constructions, or as surface coatings in enclosed tanks or structures, or below ground, where their durability is well proven.

 

Features

Application Demo



Application

Typical Properties

Properties

Unit

Standard

Values

COLOR

~

ASTM D 1544

Black

SPECIFIC GRAVITY

~

ASTM D 1475-98

0.87

VISCOSITY

secs

ASTM D 1200-10

60 to 90

POT LIFE

mins

IS 101

Single

FUNCTIONAL CURE

hrs

ASTM D 1640

16

COVERAGE @ WFT/DFT/THICKNESS/NO.OF.COATS

~

~

 

CURED HARDNESS

shore D

ASTM D 2240

68

TENSILE STRENGTH

N/mm2

ASTM D 412

1.2

COMPRESSIVE STRENGTH

N/mm2

ASTM D 695

35

CHEMICAL RESISTANCE

%

ASTM C 267

Excellent

SERVICE TEMPERATURE

~

°C

-40 to 60