Monarch Industrial Products (I) Pvt Ltd

(An ISO 9001 : 2008, ISO 14001 : 2004 & OHSAS 18001 : 2007 Certified Company)

Select Countries

Summer cool paints

The materials used for construction of building absorb and transfer heat inside of the building all the day. Heat always flow from the warmer side to cooler side and cooler to warmer side. 80% to 95% of heat gain during summer and about 70% of heat loss during winter trasferred through the walls, ceiling and roofs of the building by way of conduction and radiation. The conventional insulation only slows down the rate of heat transfer which after saturation cannot stop radiant heat. Monarch heat reflective coatings protect your roof from the deterioration caused by the sun's heat and UV radiation – heat absorption, asphalt breakdown, and thermal shock from heating/cooling cycles. Monarch heat reflective coatings provide a highly reflective, seamless solar barrier, protecting your roof against the corrosive elements that lead to moisture penetration and damaging leaks. If left unattended for too long, roof deterioration will exceed the limits of normal maintenance, and lead to a costly roof replacement.

OzoProtect TC

(Thermo coat High Performance Heat / Solar Reflective Coatings for Walls and Roofs)

Description :

Ozoprotect TC is a water-based, high solids, acrylic latex elastomeric energy star qualified coating reducing the heat loading into a buildings upto 40%. This highly effective radiant barrier, heat reflecting roof coating paint is designed for maximum thermal efficiency, high reflectivity, ultra voilet resistance and years of trouble free service.

 For Application Procedures :  Click Here


Triple Action Coatings

Where to Use?

Application Demo


  • Typical Reduction in Roof Temperatures
  • RCC terraces: 10°C to 15°C
  • Asbestos cement sheets: 15°C to 20°C
  • GI or powder coated sheets: Up to 25°C

Commercial Application

  • Hotels
  • Schools
  • Theater
  • Colleges
  • Apartments
  • Hospitals
  • Office Buildings
  • Shopping Malls
  • Restaurant
  • Warehouses
  • Air-Conditioned Building
  • Sintex water tanks and pipe lines - To prevent water heat up

Follow this simple steps for application procedures


Clean and Wash the Surface


Mix OzoProtect well, get to brushable consistency


Apply using a brush or roller


Apply two coats OzoProtect at 1-2 hours interval without dilution

Note :

  • Simple to DIY.
  • Simple to brush application/Avail local painters.

For Best Result :

  • Apply immediatly after water wash.
  • Avoid application during peak hot conditions (12.00PM to 2.00PM)

Our Bank Details